Replacement Wheel Solutions for Demco Tow Dolly

Question

Question:

this wheel fix my Demco tow dolly ? my bolt pattern is 4 1/2 inch tire size 215 70R14

asked by: J. F

0

Expert Reply:

We have just what you are looking for to replace the wheel of your Demco Tow Dolly with the part # DM11574 for just the wheel or part # DM5965 for the wheel and tire! A standard trailer wheel like the # AM20364 will not work as it doesn't have the correct offset which is why you have to use the Demco wheel options.

Standard trailer wheels like the # AM20364 have a zero offset while Demco wheels like the # DM11574 have a +42mm offset.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I just spoke with my rep at Demco and they said the 8 circle style 14" chrome wheels item #DM11574 that we carry is the only style they have. They no longer offer the 10 circle one you are needing to match your current wheels.

view full answer...

Answer 2

The ST205/75R14 Radial Trailer Tire w/ 14" White Mod Wheel #DM5965 comes in a quantity of one. So if you are just needing a spare tire with your Kar Kaddy, like (Discontinued) DM9713046, then you just need one. If you are needing to replace…

view full answer...

Answer 3

Yes there are! In fact, there are two - the Dexstar Conventional Steel Wheel #AM20304 is a 14" wheel with a +0.5" offset and has a 5 on 4-1/2" bolt pattern and has a Black powder coat finish. The other option is the Dexstar…

view full answer...

Answer 4

The shipping weight for the Dexter #7359765-EB replacement EZ-Lube 3500 lb axle and 10 inch brake drums is 102 lbs. The hubs come complete with bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 12

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...