Replacement Tarp for Lo Pro QT on 2015 Ram 1500 5.5 ft Bed

Question

Question:

2015

asked by: Kevin D

0

Expert Reply:

What year Ram do you have? I can check to see what tarp is the correct one. The Lo Pro is listed as having a limited lifetime warranty. You might check with who you bought the cover from to see about checking into a claim.

expert reply by: Jameson C

0

Kevin D.

12/2/2019

2015

Reply

Jameson C.

12/2/2019

That means the cover you have is part # TX545901 and the cover replacement you need is # TX5459-CVR.

Reply

Answer 1

Here is the replacement cover that fits your 2017 Dodge Ram 1500 5 1/2 foot bed without a Rambox. Item #TX5459-CVR is the TruXedo Lo Pro Soft, Roll-up Tonneau Cover in black you'll need.

view full answer...

Answer 2

The correct replacement rear header for your 2017 Ram 1500 5.5 foot bed with a Truxedo Lo Pro is the part #TX5459-RearHeader since the tonneau you have is the #TX545901.

view full answer...

Answer 3

The best method to identify the tonneau cover on your 2008 GMC Sierra will be to look for the date code and or serial number. The serial number is located on the driver's side of the front header on the TruXport frame. The date code is…

view full answer...

Answer 4

Based on your recent searches, I believe you do not have a RamBox installed on your 2014 Ram 1500 with a 5-1/2 foot bed. If this is the case, the TruXedo Lo Pro model you have is the #TX545901. With this cover, the replacement you need is the…

view full answer...

Answer 5

Yes, the replacement Lo Pro QT cover part #TX5459-CVR comes with Velcro installed on the edges of the cover.

view full answer...

Answer 6

Since tonneau covers have specific fits we will need some more information to make sure you get the correct replacement tarp. If you can find a part number on your older tarp somewhere then we can go with that once we know who the manufacturer is,…

view full answer...

Answer 7

The correct replacement tarp for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part #TX545901 that you have on your 2010 Ram 1500 with the 5-1/2' bed is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover part #TX5459-CVR…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...