Snowboard Carrier For 2020 Subaru WRX Without Roof Rack

Question

Question:

i have a 2020 subaru WRX and I don't really want to put a roof rack on it but I need to get my snowboards around. What do you suggest?

asked by: Heather

0

Expert Reply:

I have the perfect snowboard carrier option for you with the SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted part # 298-SK2425. This carrier will carry 2 snowboards or 4 sets of skis with poles. The carrier does not require a roof rack because it suctions to the roof of the Subaru with really strong vacuum cups. I know it seems like the carrier wouldn't stay on the roof but the cups have a pull strength of 210 lbs per cup. When SeaSucker was here they demonstrated how strong the system is and it's not going to come off the roof without releasing the pressure. The best thing about the carrier is it's easy to take on and off the roof for storage when not in use so it's super convenient too.

expert reply by: Heather A

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

Hey Tim! Yes, the Rhino-Rack Ski and Fishing Rod Carrier #RR572 will fit the older Thule square crossbars. While this kit does come with T-Slot hardware, it also has the clamps which is what you'll use for the square crossbars.

view full answer...

Answer 9

I attached a picture that shows reels not hitting the roof of a vehicle that are being carried in the Rhino-Rack Ski and Fishing Rod Carrier #RR572. Unless you had a really low profile set of crossbars you wouldn't have any issue at all.

view full answer...

Snowboard Carrier For 2020 Subaru WRX Without Roof Rack

Product Page this Question was Asked From

Continue Researching