How To Install A Brake Controller On A 2020 Jeep Wrangler Unlimited With Factory Tow Package

Question

Question:

I'm just getting started towing and will need to add a brake controller. The simpler the better. I got the 2020 Jeep Wrangler Unlimited with factory tow. What do you recommend?

asked by: Simone A

0

Expert Reply:

If a simple install and operation is what you're looking for, look no further than the Curt Echo Mobile Trailer Brake Controller # C51180. Since you have the tow package on your 2020 Jeep Wrangler, the Echo brake controller unit plugs directly into your 7-way trailer connection with no wiring required to your trailer either. You can accomplish all your brake controller functions through an app you download on your phone. Simple.

For a hitch, the etrailer.com Trailer Hitch Receiver # e98856 is a great option in an attractive and scratch resistant matte black finish. An adjustable ball mount like the Flash Solid Steel HD Adjustable 2-Ball Mount # FA49-00-5625 with 2 different size hitch balls then completes the package with the flexibility to fit multiple height and coupler size trailers.

Included are video resources with additional information to get you started.

expert reply by: Patrick R

0

Answer 1

We have a very good solution for your problem! With the factory tow package you can use Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep part #3073-P this custom adapter allows you to plug in directly to the existing port under…

view full answer...

Answer 2

The Curt Echo Mobile Trailer Brake Controller - Wireless #C51180 will work with your Apple phone connected to your stereo and charging, but it is not compatible with Apple Car Play so it won't show up on your stereo screen. Apple Car Play…

view full answer...

Answer 3

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

I drew up a diagram below that displays the dimensions from the center of the mounting points to the center of the crosstube so that you can measure and determine if the Curt Custom Base Plate Kit #C68FR would clear the bumper. In the attached video…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

How To Install A Brake Controller On A 2020 Jeep Wrangler Unlimited With Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching