Weight Distribution and Sway Control Recommendation for 2020 Jayco Jayfeather 28RL
Question:
I have a 2013 chevy silverado 1500 lt extended cab and i am looking to buy a 2020 jayco jayfeather 28rl or jayco white hawk 27rl. I would like advice on which weight distribution hitch with sway control would be the best purchase.
asked by: Jeffery B
Helpful Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
I looked up the weight of the 2020 Jayco Jayfeather 28RL and the White Hawk 27Rl based on its loaded weight capacity you'd most likely be looking at a tongue weight around 900-1,000 lbs. So the best weight distribution and sway control for that would be the Strait Line part # RP66084 which has a tongue weight range of 600-1,200 lbs which would be perfect for that and also has the best sway control design that works to prevent sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Q&A: Should 1 or 2 Bar-Style Friction Sway Control Units be Used on a 7,000 Pound Trailer
- Q&A: Recommended Weight Distribution System for a 3,500 lbs Trailer
- Q&A: Availability Of TLC65 Trimax Trailer Wheel Chock and Lock With A23456 Keys
- Article: Determining Trailer Tongue Weight
- Q&A: What Towing Mirror Extensions Will Fit My 2022 Toyota Tundra Limited?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Parts Needed to Add Brake Controller to 2024 Toyota Sienna Platinum
- Q&A: Can Trailer Be Reversed with Reese Friction Sway Control Unit Installed