Westin Sportsman Grille Guard Mounting Kit for 2004 GMC Yukon

Question

Question:

I bought a used Westin Sportsman Grille Guard and they said it came off of a 2004 of similar chevy tahoe, and I have a 2004 GMC Yukon SLT. Seems I need the Replacement Mounting Kit # 40-033PK so I looked it up on your site and the install document BUT the mounting brackets on the picture dont look anything like the bracket shapes on the install document, so Id like for someone to look up the correct product kit I need and confirm it will fit my 2004 GMC Yukon? Thanks,

asked by: Don D

0

Expert Reply:

The instructions linked to the page for the Mounting Kit # 40-033PK, which is for the Westin Sportsman Grille Guard # 40-0335 that fits your 2004 GMC Yukon SLT look a little different because the online instructions are from the kits that pre-date 2009. In 2009 Westin changed where the brackets were made so the kit # 40-033PK is the newer version with the new style brackets. The instructions that come with this kit will highlight the new brackets. It's worth noting that the new brackets have to be paired with a grille guard that is made after 2009 as they won't be compatible with the older version of the grille guard.

With that being said, the Westin Sportsman Grille Guard that came off of the 2004 Chevy Tahoe is part # 40-0185 and requires the Mounting Kit # 40-018PK. Since grille guards and their mounting hardware are vehicle specific you unfortunately won't be able to mount the grille guard you purchased with the Westin mounting hardware for your vehicle.

Your best option is to sell your current grille guard and then purchase part # 40-0335 which is a fit for your '04 Yukon and comes with the mounting hardware.

expert reply by: Jon G

0

Answer 1

We have a number of grille guards available that include the mounting hardware but the brackets would be specific to what grille guard you have. If you are interested in the options please let me know and I'll be happy to help.

view full answer...

Answer 2

I went ahead and checked, and the Westin Sportsman Grille Guard #40-0185 you mentioned is actually only going to be a fit for the 2006 Chevrolet Suburban 1500, and will not work on the 2006 GMC Sierra 1500. Since these grille guards are going to be…

view full answer...

Answer 3

The Westin Sportsman grille guards and the hardware kits for them are made specifically to fit vehicles which means you can't use a new hardware kit to fit a guard to a new vehicle. So for your 2002 GMC Yukon the correct grille guard is the part…

view full answer...

Answer 4

A Chevy Tahoe would require the Westin Grille Guard part #40-0185 which means the correct replacement hardware kit you would need is the part #40-018PK. I attached an installation instructions link to this page for you to check out.

view full answer...

Answer 5

The thing about the Westin grille guards is that they and the mounting hardware are both designed to fit specific vehicles. It would be awesome if you could take a grille guard from one vehicle and mount it to another with just the right hardware,…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Westin Sportsman Grille Guard Mounting Kit for 2004 GMC Yukon

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching