Replacement Entry Door Latch for Dodge Monaco Motorhome

Question

Question:

Looking for replacement door lock for my entry door on my 1981 Dodge Monaco motorhome

asked by: Charles J

0

Expert Reply:

The only entry door latches we offer are the Global Link RV Entry Door Locking Latch Kits which are available in chrome part # 295-000002, white part # 295-000021, and black part # 295-000019. These door latches will all install in a cutout from 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. Therefore, in order to make either option work you may need to modify your cutout to accommodate this range but we do not offer any other options. That said, I really do not think you will be able to find an exact fit replacement due to the motorhome's age so this will be your best option.

expert reply by: Conner L

0

Answer 1

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is…

view full answer...

Answer 2

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 3

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

view full answer...

Answer 4

I checked with Aliner for availability of key number SM103 and and they do still have some keys for that lock. You can contact them directly for a replacement key. I sent their phone contact information to you. If you ever decide to replace the whole…

view full answer...

Answer 5

For your application you need the Pre-Greased Easy Grease Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K. This matches all of the specs you mentioned and while it's only rated for 3.5K axles, it will still work for your Lippert 4.4K axle since…

view full answer...

Answer 6

I spoke with my contact at Reese and he sent me dimensions of the Pro Series Jack, item # PS14009503676. I have included a drawing containing these dimensions for you to review. There is no owners manual included with these Jacks at this time. The…

view full answer...

Answer 7

The BoatBuckle Boat Winch Strap with Hook and Safety Latch part #IMF05848 will be the perfect replacement strap option for a Shelby Trailer Winch 5404. It's a 2" wide strap rated at 1,333 lbs.

view full answer...

Answer 8

The Shelby 5404 winch is a 1,200 lb winch with a 20 foot nylon strap. The Dutton Lainson part #DL14996 is a similarly rated 1,500 lb winch and for a strap you would need the part #DL24249. This setup would be slightly stronger and less likely to bend…

view full answer...