Recommended Cover for Rpod 191 with Thule Awning

Question

Question:

What cover do you recommend for an Rpod 191 with the Thule awning, for snow/sun protection in Montana? Thanks

asked by: Tanya

0

Expert Reply:

The best option for a storage cover for your R-Pod 191 is going to be the Classic Accessories PolyPRO 3 # CA80-197-171001-00 as it's the correct size and offers the best protection in all climates like where you'll be in Montana that has a lot of snow and sun. This will easily fit with the Thule awning you have as well.

expert reply by: Jameson C

0

Answer 1

For a 2020 Forest River R-Pod 195, I'd recommend the Classic Accessories #CA80-197-171001-00 that you'd looked at. The cover is designed for R-Pod campers up to 20 feet long, so it'll work great for your 195. The cover will do a great job…

view full answer...

Answer 2

Both the Curt hitch part #C13172 and the part #C13171 will sit right under the rear bumper of a 2014-2015 Jeep Cherokee when installed so one would not have any more ground clearance than the other. The biggest difference between the two is that the…

view full answer...

Answer 3

The R-Pod 191 models are 20 feet in length so the Classic Accessories storage cover #CA80-197-171001-00 that you referenced will fit and work well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Cover for Rpod 191 with Thule Awning

Product Page this Question was Asked From

Continue Researching