Roof Rack with Flush Bars that Fits 2019 Mazda CX-3

Question

Question:

Hey, my 2019 Mazda CX-3 has 4 fixed points on the roof. Just making sure this rack will fit. Thanks

asked by: Landon

0

Expert Reply:

We have a very similar roof rack to the Rola you mentioned that is confirmed as a fit for the factory fixed mounting points on the roof of your 2019 Mazda CX-3 but the Rola kit does not fit your vehicle.

Instead the Thule roof rack part numbers # TH711400, # TH710501, and # TH145136 which is an aero bar roof rack.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yakima discontinued the Q Towers some years ago (in fact, they're on their second generation change since that) and parts for those towers are not made. I searched and was able to verify just a single roof rack fit for your 2022 Ford F-150…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

A few years ago Thule totally redid their roof rack designs which means there isn't a way to install an older Thule set of crossbars on your 2021 Jeep Grand Cherokee. Best option would be an all new Thule roof rack for your vehicle with the…

view full answer...

Answer 8

I personally prefer the Thule WingBar Evo roof rack for your 2024 Kia Telluride. I prefer this system as it uses a 2 piece seal on the top channel which allows you to easily slide in your roof mounted channel accessories without requiring removal and…

view full answer...

Answer 9

We have several roof rack options that will fit your 2013 Ford Flex with the factory side rails. I've attached a link to our entire selection for you to check out. My personal recommendation would be the Thule WingBar Evo system. For a complete…

view full answer...

Answer 10

For your 2019 Audi Q7 the Thule WingBar Edge roof rack part numbers #TH79FE, #TH29SC, and #TH52RE will be your best low-profile solution. The flush bar style of racks will give you the lowest clearance for your garage door, and is compatible with all…

view full answer...

Answer 11

I recommend installing the Thule WingBar Evo roof rack on your 2024 Toyota Camry. I prefer this roof rack as the crossbars use a 2 piece channel seal which makes it easy to slide in a Kayak Carrier #LR28FR. You will need the Crossbars #TH711420, Feet…

view full answer...

Roof Rack with Flush Bars that Fits 2019 Mazda CX-3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching