Could Dexter Over Under Kit # K71-384-00 Fit 2017 Winnebago Minnie

Question:

No springs on my trailer, axle mounted directly to frame, dont think this product will work. Trailers with springs, Yes it would work. Thanks for answering my question, may have found another option.

asked by: KELLY K

Helpful Expert Reply:

As long as your 2017 Winnebago Minnie has a 3,500 lb axle that is 2-3/8 inch in diameter the over under kit part # K71-384-00 would be what you'd need. We don't have a way to look up this info on your trailer but it's pretty easy for you to find out. You can simply measure the diameter of the axle or you can look on the trailer VIN plate to see if you can find the axle capacity listed there. If you find you have something else let me know and I'll see what you'd need.

expert reply by: Jameson C

Kelly K.

10/8/2019

No springs on my trailer, axle mounted directly to frame, dont think this product will work. Trailers with springs, Yes it would work. Thanks for answering my question, may have found another option.

Jameson C.

10/8/2019

Sounds like your trailer has torsion springs which are very common for that size of camper. We have several lift kits for these styles of axles if they are made by Lippert or Dexter (nearly all are so that shouldn't be a problem), but what I need from you is the capacity of the axle and any other info you can get off of it. There should be a label on the axle or up near the coupler of the trailer with the axle info listed. The Dexter Torflex lift part # K71-707-01 is a very common solution as it fits the Torflex #10 axles and gives a lift of 2-5/8 inches. I attached a link to a page that has all of the lifts we offer for you to check in the meantime. But if you can get back to me with what you find I can help you further.