Will Trailer Hitch for a 2019 Toyota Corolla Sedan Fit Hatchback Model

Question

Question:

This says it will fit a 2019 Corolla sedan, but what about a hatchback? Any differences?

asked by: Caleb S

0

Expert Reply:

There actually is a difference as the Hatchback is a completely different model than the Sedan for a 2019 Toyota Corolla. For your Hatchback you need the Curt Trailer Hitch # C11567 which has a cleaner look when installed due to the crossbar being hidden. Most manufacturers don't have a big difference between the Sedan and Hatchback versions of the same model but there is enough difference for the '19 Corolla (the Hatchback used to be the IM) that Toyota lists it as a separate model altogether.

Attached is a photo showing what the trailer hitch will look like once installed as well as the written installation instructions that you can check out. If you let me know what you plan on using the trailer hitch for I can make some recommendations for you.

expert reply by: Jon G

0

click to enlarge

Answer 1

We do have a hitch that will fit your 2022 Toyota Corolla Hatchback. The Curt Trailer Hitch Receiver #C11567 is confirmed to fit your Corolla Hatchback and features a bolt-on, no drill installation. This hitch is made in the USA and will provide you…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Will Trailer Hitch for a 2019 Toyota Corolla Sedan Fit Hatchback Model

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching