How Does The Trailer Valet RVR9 Remote-Controlled Trailer Dolly Stop The Trailer

Question

Question:

Do they have a place to plug in and disconnect the trailer brakes?

asked by: Pete

0

Expert Reply:

The Trailer Valet like part # TVRVR9 do not require the trailer's brakes to be connected to the unit because the trailer valet will only move when you are pressing the arrow buttons on the included remote. I have attached a video to show you how the Trailer Valet remote controlled trailer dolly works.

expert reply by: Heather A

0

Answer 1

A standard trailer dolly like #RA20 is not directly compatible with the Lock N Roll hitch system. There is not a dolly designed to work with that system, however if you were to use a similar system with the ability to attach to a hitch ball, then a…

view full answer...

Answer 2

The Trailer Valet RVR9 #TVRVR9 is rated for a trailer up to 9,000lbs with a 900lb tongue weight. As long as your 8,000lb trailer does not exceed the tongue weight for this you will be able to move your trailer. We do have the Trailer Valet RVR12…

view full answer...

Answer 3

Yes, the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 will climb a loading ramp like the #288-07432 into the back of your truck. I confirmed this with Trailer Valet to ensure that it did not have an out of level sensor that would stop…

view full answer...

Answer 4

If your trailer is 5,000 when you are wanting to move it then you can use the Trailer Valet RVR5 Remote-Controlled Trailer Dolly #TVRVR5 which is rated for 5,500 lbs. If you are wanting to move your trailer and that weight exceeds the 5,500 lb mark…

view full answer...

Answer 5

I've attached the photos of the instructions that come with the Trailer Valet XL Mounting Bracket #TVXLMB. It's a 2 page document, but hopefully it gives you a good idea of how it mounts and works with a Trailer Valet #TVXL2 or…

view full answer...

Answer 6

The Trailer Valet RVR9 Remote-Controlled Trailer Mover #TVRVR9 is a 4-motor device. There are other versions of this unit that use fewer motors but this one has 4. The maximum surface slope compatible with this device is 5 degrees. I did confirm…

view full answer...

Answer 7

I'm sorry to hear that your trailer dolly didn't work out as well as you had hoped. Since you plan to use the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 in areas that aren't always smooth and level, I would…

view full answer...

Answer 8

The maximum grade for the Trailer Valet Remote-Controlled Trailer Dolly part #TVRVR9 is 5 degrees of incline. If it's anymore than this you'll want to use the Trailer Valet XL Trailer Dolly with Chain Drive part #TVXL2 for 2"…

view full answer...

Answer 9

I recommend stepping up to the Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR due to the weight of your Airstream Globetrotter 27FBQ. This dolly is rated for trailers up to 12,000lbs and a tongue weight up to 1,200lbs. The RVR9 #TVRVR9…

view full answer...

Answer 10

You are correct. Since your boat trailer has an electric lockout solenoid you will not be able to use the Trailer Valet RVR9 Remote-Controlled Trailer Dolly - Wireless Remote - 9,000 lbs #TVRVR9 without the brakes being applied. Instead what you…

view full answer...

Answer 11

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer.…

view full answer...

Answer 12

The maximum grade for the Trailer Valet Remote-Controlled Trailer Dollies is 5 degrees. The capacity does not change this figure although the higher rated RVR9 part #TVRVR9 will preform better than the RVR3 part #TVRVR3-BB225 with a lighter trailer…

view full answer...

How Does The Trailer Valet RVR9 Remote-Controlled Trailer Dolly Stop The Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching