Shim for Stromberg Carlson Lend-a-Hand Folding Grab Handles # 5991-SM

Question

Question:

How many come in a package? Shim for Stromberg Carlson Lend-a-Hand Folding Grab Handles # 5991-SM

asked by: Mary H

0

Expert Reply:

The # 5991-SM shims are sold individually.

expert reply by: Mike L

0

Answer 1

Yes, I looked up the outlet you referenced and it appears to be a 50 amp socket like what the #CAM55572 that you referenced is designed to work with.

view full answer...

Answer 2

We do not currently sell those items separately. You would have to buy a whole new kit under TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 10 Tire Sensors Item #TM56FR.

view full answer...

Answer 3

The Lippert Push Bar for RV Screen Door #LC83UD is designed to fit 26" to 30" door. This information is found on the door tag as the door itself will be narrower than this hence the reason the bar has a length of 21-1/2" to 28".…

view full answer...

Answer 4

The Stromberg Carlson shim kit, part #5991-SM, is just one shim. It's kind of misleading since it's called a kit but if you need two you do need to order two of them.

view full answer...

Answer 5

If you have a Stromberg Carlson Lend a Hand style RV hand rail we have the shim part #5991-SM which will push it out 1/4 inch. Two would get you to 1/2 inch like you need.

view full answer...

Answer 6

The psi should be listed on the sidewall of the tire. It is recommended that tires always be inflated to the max psi. Different tire manufacturers may have different psi ratings even for the same tire size and load range, so it's always best to…

view full answer...

Answer 7

For the Westlake ST235/80R16 Radial Trailer Tire #LHWL401 you have I recommend setting your TPMS temperature alarm for 158 degrees Fahrenheit. This is a common temperature used with most TPMS like the TST TPMS for RVs #TST-507-FT-6-C as individual…

view full answer...

Answer 8

I went out to our warehouse and measured the Shim for Stromberg Carlson Lend-a-Hand Folding Grab Handles for RVs #5991-SM. The overall length is 3-7/8", 2-3/8" wide, 1/4" thick and the mounting holes are 1-1/8" on center.

view full answer...

Answer 9

It sounds like the Power Grip 90-Degree Locking RV/Marine Power Cord w/ Handle #CAM55572 is exactly what you are needing. It has the lock ring on the 90 degree end and then the threads for a lock ring on the other end (no locking ring). There must…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Shim for Stromberg Carlson Lend-a-Hand Folding Grab Handles # 5991-SM

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching