How Much Does Brophy Camper Scissor Steps # AS24 Weigh

Question

Question:

How much does the Item # AS24 weigh? Its aluminum and should be fairly light to transport when folded but getting up there in the years so necessary that its light enough for me to lift it and store it.

asked by: Larry W

0

Expert Reply:

The Brophy Camper Scissor Steps # AS24 that you referenced weigh 25 lbs total and have a weight capacity of 300 lbs.

I attached a review video for them for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Unfortunately Jerry, all of our steps like the Brophy Camper Scissor Steps - 4 Steps - Aluminum #AS24 you were looking at are going to be shipped already assembled. Although this may be rather obvious, but you are more than welcome to tinker with it…

view full answer...

Answer 2

The 4 step Brophy Camper Scissor Steps, #AS24 is recommended for an entry height of 31" - 40" while the 5 step model, #AS25 crosses over for an entry height of 40" - 48". My recommendation is to go with the 5 step model that…

view full answer...

Answer 3

You are correct the Aluminum Scissor Steps, 24 inches Wide, 31-39 inches Tall, part #AS24, can be fully extended to 39 inches tall, or can be slightly compressed so that they measure 31 inches tall. You will need to measure from the ground to the…

view full answer...

Answer 4

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

view full answer...

Answer 5

Are you basically asking how much length would this coupler add to the tongue of your trailer?

view full answer...

Answer 6

The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.

view full answer...

Answer 7

The Brophy Camper Scissor Steps part #AS24 will require 1-1/4" of clearance between the bottom of the door and bottom of the cab on your Palomino Truck Bed Camper in order for the mounting bracket to attach. If you removed a portion of the trim…

view full answer...

Answer 8

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 9

Sounds like you'd want to go with a removable scissor setup like the Brophy Camper Steps part #AS24 which will need to be taken off it's mounting bracket between uses. This will give you total access to your trailer hitch when needed.

view full answer...

Answer 10

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 11

The Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs #AS24 will work well for your Lance 650 Camper as long as the height to your threshold is between 31 and 39 inches. If it is between 24 and 30 inches…

view full answer...

Answer 12

The TorkLift Glow Steps part #TLA7804 would work great for you as they will have a distance of 34-1/2 inches from the mounting bracket to the ground when installed and come with pins that are easily removed from the top of the steps when you need to…

view full answer...

How Much Does Brophy Camper Scissor Steps # AS24 Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching