Recommended Bike Rack for RV Ladder with Larger Steps

Question

Question:

The depth of each step of our ladder is 4 inches and the thickness is 2 inches. Do you have a rack that will fit on the ladder?

asked by: Charlene K

0

Expert Reply:

I recommend the Surco 2 Bike Carrier # SP501BR that attaches to the vertical side tubing of the ladder and not the rungs/steps. As long as your ladder features 1" diameter tubing it will work perfectly.

I have attached a short video demonstration that you can check out as well.

expert reply by: Chris R

0

Answer 1

The rubber straps on the cradles of the Surco 2 Bike Carrier #SP501BR have a little bit of stretch but I wouldn't be able to tell off-hand if it is compatible with the design of your wife's bike frame. It looks like it would be close…

view full answer...

Answer 2

We offer two adjustable-width frame-mount hitches for your Winnebago that has a 31-inch frame spread. Curt 2-inch hitch #13703 can be bolted or welded on a frame from 22- to 72-inches wide. It offers a 350-lb tongue weight capacity. This item fits on…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 7

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 8

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I have a set that will work however your 2023 Chevy Suburban's owners manual says not to use tire chains because of clearance issues on the inner part of the tires. You can find this information on page 370. To avoid damaging brake lines and…

view full answer...

Answer 11

When the Curt hitch part #C13420 is installed on a vehicle like your 2020 Kia Telluride the height of the hitch opening is right about the same height as the exhaust. So your best option would be a cargo carrier with a rise built into the shank. The…

view full answer...

Answer 12

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Recommended Bike Rack for RV Ladder with Larger Steps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching