Can Ultra Fab Gooseneck Stabilizer Tripod be Used with Reese Goose Box Adapter

Question

Question:

Will the gooseneck stabilizer work with the Reece goosebox?

asked by: Patrick M

0

Expert Reply:

Yes, the Ultra-Fab Gooseneck Trailer Tripod Stabilizer # UF19-950450 that you referenced will fit and work great with a Reese Goosebox fifth wheel to gooseneck adapter.

expert reply by: Jameson C

0

Answer 1

The Clearsource Ultra RV Water Filter System w/ VirusGuard #CS87FR weighs 34.125 lbs.

view full answer...

Answer 2

The Mighty Cord RV Power Cord Adapter, #A10-3050D90VP is used to adapt your RV's 4-prong 50-amp power inlet for use with a 30-amp 3-prong extension cord/Power Pedestal. A 50-amp plug has four prongs with two of them providing 50-amps of…

view full answer...

Answer 3

When using the Mighty Cord RV Power Cord Adapter #A10-3050FBK to hook your 50 amp service camper up to 30 amp shore power you're getting power to both leg of the 50 amp plug legs. If you took a multimeter, like #PT89ZR, and tested the legs…

view full answer...

Answer 4

You can hook up your 50 amp RV to a 30 amp power source so long as you have an adapter like the Mighty Cord RV Power Cord Adapter - 50 Amp Female to 30 Amp Male #A10-3050FHVP. Since you mentioned you are using an adapter you can do this and won't…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 10

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 11

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 12

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

view full answer...

Can Ultra Fab Gooseneck Stabilizer Tripod be Used with Reese Goose Box Adapter

Product Page this Question was Asked From

Continue Researching