Replacement Linc Remote for a Forest River Sonoma RV

Question

Question:

My remote got damage and I need to replace it. It looks the same as this one but without the E in the lower corner. I have a 2017 Sonoma 240RKS. Will this work?

asked by: Chris B

0

Expert Reply:

The Replacement New-Style Linc Analog Remote part # LC292614 is the correct replacement for your 2017 Forest River Sonoma 240RKS. The etrailer logo in the lower right hand corner is just a sticker we place on our products for advertising purposes but it will not be on the actual remote you receive.

expert reply by: Conner L

0

Answer 1

The momentary push button is usually on the LINC receiver box. Press and hold this button then press the light button on your remote #LC292614 until you hear the receiver's relay click. Release the momentary button and your remote should be…

view full answer...

Answer 2

In order to sync the Linc Analog Remote part #LC292614 you will want to follow the steps I have listed for you below: 1) Press and hold the momentary push button on the receiver. 2) Press “Light” (A) button on the transmitter until relay on receiver…

view full answer...

Answer 3

I have no way of knowing what remote came with your Forest River Salem trailer but if you have the Linc system then the Replacement New-Style Linc Analog Remote item #LC292614 will work. If you don't have the Linc system go ahead and send me a…

view full answer...

Answer 4

I have attached a photo for you that shows the location of the reset button on the receiver which is directly above the blue cylinder, in the top center of the unit. Once this is pressed then you can follow the re-sync procedure of the Replacement…

view full answer...

Answer 5

The Replacement 5-Function Remote Receiver with Replaceable Fuses #LC305117 will fit on any motorhome that has the Lippert Linc remote. If you want to add this feature you can use the receiver along with the Replacement New-Style Linc Analog Remote -…

view full answer...

Answer 6

Sounds like you are trying to program a LINC remote like the part #LC292614 and need to find the receiver so that you can hit the "momentary push button". Normally the receiver is located above where your generator is stored.

view full answer...

Answer 7

My understanding was that the holder for the New-Style Linc Analog Remote #LC292614 was supposed to be located near the trailer entrance. I imagine this can vary by manufacturer though so it would be best to contact them directly. We do carry the…

view full answer...

Answer 8

We get this question a lot. The momentary push button on your Lippert LINC system that you need to press to program the Remote Control #LC292614 is not on the remote, but rather on the LINC receiver box which is usually located near the generator.…

view full answer...

Answer 9

The momentary button you are looking for on the receiver that you need to find to program the Replacement New-Style Linc Analog Remote #LC292614 is typically located above where your generator is stored.

view full answer...

Answer 10

Usually you will find the LINC remote control receiver in the same compartment as your generator; on this receiver there will be a push button that you're looking for. This is the button mentioned in the instructions as the momentary switch that…

view full answer...

Answer 11

Everything I could find on your 2018 Keystone Sprinter Campfire edition leads me to believe it is using a Lippert Components system. We have a couple options for Lippert Systems for a replacement remote. We have the Replacement New-Style Linc Analog…

view full answer...

Answer 12

It looks like you have the Lippert remote control part #LC292614. I have attached instructions on how to link the remote to the receiver. Our contact at Lippert said if the remote does not pair with the receiver then the remote may have blown a fuse,…

view full answer...

Replacement Linc Remote for a Forest River Sonoma RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching