Will Truck Bed Cargo Camera For 2019 Ford F-250 Super Duty Be Blocked By Toolbox

Question

Question:

Will a toolbox get in the way of seeing the ball for hook up

asked by: John L

0

Expert Reply:

The Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit part # 3460001 does feature a 150 degree angle image and 360 degree adjustable camera. Since your tool box is most likely up against the cab, you can adjust the camera angle to see over it. I have attached a screen shot of the vehicle that shows the camera angle with a Gooseneck ball setup for your reference.

This particular camera is made for Ford with a 8" factory monitor, if your Ford has a 4.2" monitor you will need part # 3460002.

expert reply by: Heather A

0

click to enlarge

Answer 1

I recommend the SumoSprings Solo Custom Helper Springs part #SSR-117-47 instead of part #SSR-117-40 for your 2019 Ford F-150. In regards to the SumoSprings, you will always want to have a safety margin and the above will be perfect for your setup.…

view full answer...

Answer 2

If you have the factory auxiliary switch then just wire the Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision #3460001 to that. If you don't have the factory auxiliary switch then you will want to utilize that toggle…

view full answer...

Answer 3

Yes, you can use the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit #3460001 that fits your 2016 Ford F-150 with an 8" factory monitor as an observation camera so you can see your truck bed. What you will need to do is simply…

view full answer...

Answer 4

Yes, one of the really great things about the Custom Third Brake Light Camera for 8" Factory Monitor #3460001 is the fact that once installed it allows you to easily switch between the views of the third brake light camera and the tailgate…

view full answer...

Answer 5

Since the toolbox you have is up against the cab it should not pose a problem for the Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision #3460001. The camera manually adjusts 360 degrees and has a 150 degree viewing angle so…

view full answer...

Answer 6

If you want to see the entire install process of the third brake light camera kit #3460001 for your 2020 Ford F-250 check out the linked video on this page. We ran the wiring up to the engine bay area which is the only and best place to run the…

view full answer...

Answer 7

According to the owner of GCH Automotive, the #3460001 camera can be ran through a car wash. Just make sure the gaskets are installed properly. If they aren't installed properly, the camera can leak. It's also important that the mounting…

view full answer...

Answer 8

I do have third brake light options for your 2019 Ford F-250 although I am not exactly sure what you mean by interphase. The third brake light cameras available for the 2019 F-250 Super Duty are compatible with what specific monitor have from the…

view full answer...

Will Truck Bed Cargo Camera For 2019 Ford F-250 Super Duty Be Blocked By Toolbox

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching