Do SuperSprings Replace Factory Springs on 2019 Ford F-450 With Factory Upper Overload Springs

Question

Question:

Can you confirm whether the Super Springs could be used in conjunction with Lower Stable Loads. I know the upper would not work. Many thanks

asked by: Alex F

0

Expert Reply:

Those are good questions, and the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA25 will not replace the factory springs on your 2019 Ford F-450, they work in tandem along with your springs, which will not be removed.

These are absolutely going to improve your ride because they can be customized for your application whether that means you have a constant heavy load and need constant support or simply want to get a more balanced suspension if you tow or have a heavy load less frequently. They also help prevent sway when dealing with crosswinds or making a tight turn, so your F-450 will have an improved ride with these springs.

In regards to the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs # TLA7200 that also fit your '19 Ford F-450, they are not compatible with the SuperSprings # SSA25 because the two products would interfere with each other.

I have added links to video reviews of both parts for you to check out.

expert reply by: Kyle S

0

Duke C.

8/8/2020

I am considering adding the SSA25 Superspring to my 2019 F450 to help with sway, etc when traveling with my truck camper in the bed. The information states a 3300 lbs capacity and my truck camper weighs 4200 lbs. I have installed rear Timbrens, but I also like fact of reducing sway. Would the Supersprings be advisable in my situation?

Reply

Jon G.

8/18/2020

The SuperSprings # SSA25 are actually one of the few things that you can install in addition to your Timbrens. Since you'll have 2 suspension enhancement systems it will really help out your 2019 Ford F-450, but just remember that these are designed to help out an OEM system and they won't actually increase the weight capacity of your pickup.

Reply

Alex F.

8/16/2019

Can you confirm whether the Super Springs could be used in conjunction with Lower Stable Loads. I know the upper would not work. Many thanks

Reply

Kyle S.

8/16/2019

Yes, the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA25 will work with the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs # TLA7310S or # TLA7311. The SuperSprings and StableLoad will not interfere with each other at all as they are mounted in separate places.

Reply

Answer 1

I checked with the manufacturer, SuperSprings, for you and each of the SuperSprings kits will fit your 2013 Ford F-250 or F-350 Super Duty that does not have factory overload springs. These are an excellent upgrade to your suspension because they…

view full answer...

Answer 2

Yes, you can use the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA25 for your 2017 Ford F-250 Super Duty and they will fit with the top overload springs! Attached is a review video for you to check out.

view full answer...

Answer 3

The TorkLift StableLoad Suspension Upgrade Kit #TLA7200 works on both 2WD and 4WD versions of the 2019 F-350 that has a factory leaf spring suspension and an upper overload spring. These rubber block springs replace the truck's factory bump stop…

view full answer...

Answer 4

The SuperSprings Suspension Stabilizer and Sway Control Kit #SSA13 is designed for your 2014 Ford F-250 without overload springs. A lockdown kit is required if the factory springs sit above the axle and the included poly spring pads are necessary.…

view full answer...

Answer 5

I have a couple of suggestions for you but you are really doing good on your kit so far. The TorkLift SuperHitch Magnum Trailer Hitch Receiver part #TLD1111-30 is what you want for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part…

view full answer...

Answer 6

The biggest difference between the TorkLift StableLoad Suspension, part #TLA7200 is the warranty. Torklift provides a lifetime warranty. The SuperSprings SuperSway-Stop option you mentioned has been discontinued for your vehicle so obviously people…

view full answer...

Answer 7

The TorkLift StableLoad Suspension Upgrade part #TLA7200 could engage with your overload leaf spring as soon as they are installed even without any additional weight present depending on your setup which means they will have a negative effect on your…

view full answer...

Answer 8

We do have a specific product like the SumoSprings that fits your 2022 Thor Omni RS36 on the Ford F-600 chassis; the Timbren Suspension Enhancement System for Front #TFF550SDE and Rear #TFRSDE. This installs similarly to the SumoSprings and is simply…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...