Does Solera Awning Fabric Roller have Channel for Mounting LED Light Strip

Question

Question:

Does this LCI Solera replacement awning fabric include the integrated rail on the fabric to attach the LCI LED light strip?

asked by: Greg

0

Expert Reply:

Yes, when you roll the Solera Replacement Awning Fabric # LCV000334417 all the way out there will be a rail/channel on the roller that allows the LCI LED light strip # LC674283 to install.

expert reply by: Jameson C

0

Answer 1

I went out to our warehouse to take a look at the Replacement LED Light Strip #LC423331 that you referenced. The light strip itself is extremely thin so it's going to pretty much fit inside any housing that's designed for this purpose. I also…

view full answer...

Answer 2

Yes, when you roll the Solera Replacement Awning Fabric #LCV000334448 all the way out there will be a rail/channel on the roller that allows the LCI LED light strip #LC674283 to install.

view full answer...

Answer 3

The Replacement LED Light Strip for Solera RV Awning part #LC423331 is .394" wide so you will need to have this much space inside the channel for it to mount but I suspect it would indeed work. If you wanted to be certain however you could just…

view full answer...

Answer 4

I spoke to Lippert and they told me that the LED Fabric Light Kit #LC674283 has a waterproof rating of IP55 but they don't have a Lumens rating for it. The best they could offer was the CCT which is 6000K. I attached a picture that shows how well…

view full answer...

Answer 5

This is fairly common when receiving anything shipped in a coil-like shape like the LED Fabric Light Kit with Switch/Plate for Solera RV Awning #LC674283. One of the best things to do is to grab one end of the light strip and to firmly (but…

view full answer...

Answer 6

We have a full replacement for your light. The Command Electronics #CE86FR. Take a look at the attached video to see them in action.

view full answer...

Answer 7

The Solera Awning Rail Extrusion - Black - 8' #LC715217 has mounting holes that are about 1/4" in diameter. The Self-Tapping Screw - 1/4" -14 x 3/4" #FA1131822 is the recommended screw for this and you will also need LaSalle…

view full answer...

Answer 8

The LED Fabric Light Kit with Switch/Plate for Solera RV Awning - 21' Long #LC674283 can but cut to fit your 20' Solera RV awning. According to Lippert, this LED kit is for 16'-21' awnings and is designed to be cut down to fit…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...