How Much Torque Is Needed To Pre-Load the Bearings On a Dexter Mobile Home Axle
Question:
what is nut torque torque to pre-load bearings on Dexter mobile home axle
asked by: Guy S
0
Expert Reply:
There is not an exact torque specification to pre-load the bearings on a mobile home axle. The spindle nut will need to be tightened by hand until finger tight and then turned another 1/4 of a turn with a wrench. This will be around 15 ft-lbs but you should not be using any sort of torque wrench for this. Once this is done you can then turn the hub ten or so times to seat the bearings and races but don't forget to back the spindle nut off some before you install the cotter pin and put the wheels on.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Adjuster Plugs for 7", 10", and 12" Brake Assemblies - Qty 4
- Q&A: Best Pin Box Upgrade for a Lippert 1621 on a Grand Design Reflection 303RLS
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Shop: MORryde Cushioned 5th Wheel Pin Box for Up to 11.5K Trailers w/ Lippert 1621 and 1621HD
- Shop: Unitized Oil Seal
- Shop: Replacement Oil Cap Plug for Dexter Oil Caps - Qty 1
- Shop: MORryde Cushioned 5th Wheel Pin Box for 18K to 23K Trailers w/ Lippert 1621SHD
- Q&A: Replacing a SPB72-1621LD Pin Box with a Rota-Flex or a MORryde Pin Box with Chucking in Mind
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: How to Determine Correct MORryde Cushioned Pin Box
- Q&A: Which MORryde Cushioned Pin Box for 1621 11,400 GVWR
- Q&A: Replacement Bearings and Seal for Lippert 4,400 lb Trailer Axle
- Q&A: How Much Bearing Preload Should be On Dexter 8k Axle
- Search Results: dexter 2136
- Search Results: lippert 4400 lb axle
- Search Results: 370150a
- Search Results: dexter nut retainer
- Search Results: dexter 10k
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Review of Lippert Fifth Wheel King Pin - Upgraded Pin Box - UF35-946212
- Video: Bearing Repacking and Grease Seals Installation
- Video: Gen-Y Shock Absorbing 5th Wheel Pin Box Installation - 2019 Grand Design Momentum 5W Toy Hauler
- Search Results: comfort ride hitch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring