Installing BAK MX4 or F1 Tonneau Cover on 2019 Nissan Frontier with Utili-Track Rails
Question:
Hi. Im looking at a BALFlip MX4 or an F1 tonneau cover for a 2019 Nissan Frontier short bed with the Utili Track system installed. I have some concern about installing either the MX4 or F1 with the installed Utili Track. I DO NOT want to use the Utili Track to mount the tonneau cover, or cause any interference with sliding things like the Nissan Bed Extender or their tie-downs along the Utili Track. According to BAK, the mounting instructions are the same for either the MX4 or F1. I found a QandA posting at your web site that said that the Utili Track will not interfere with either the MX4 or the F1, implying that the cover is not mounted in the Utili Track and uses small C-clamps I guess. However, at the BAK web site for these covers they post instructions specifically for the Nissan Frontier with the Utili Track system which shows clamping hardware using the Utili Track. Maybe this is just an option for mounting ??? Can you confirm that : 1 the MX4 and F1 do not require use of the Utili Track for mounting the covers 2 if clamps along the bed rail are used then these do not interfere with sliding things along the Utili Track. Thanks
asked by: Greg
Expert Reply:
I reached out to my contact at BAK and she said that on your 2019 Nissan Frontier, both the MX4 # BAK48506 and the F1 BAK72506 Hard Tonneau Covers will actually rest right above the Utili-Track system on the truck, maintaining full function of the system without any interference. One a lot of the Titan model trucks (especially older models) the covers do need to mount to the rails, which limits their function, but that is not the case with most of the newer Titans and your 2019 Frontier.
Between these two options I recommend going with the F1 # BAK72506, as it's just going to provide a more durable setup with 5/8 inch thick fiberglass-reinforced panels (compared to 1/2 inch thick panels on the MX4) that will hold up better over time and offer superior protection against Mother Nature.
I have attached a short video demonstration that you can check out as well.
Products Referenced in This Question
BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish
- Tonneau Cover
- Fold-Up - Hard
- Rack Compatible
- Opens at Tailgate
- Flush Profile - Inside Bed Rails
- Aluminum
- Matte
- BAK Industries
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Access TonnoSport Soft, Roll-Up Tonneau Cover
- Shop: Tonneau Cover
- Video: TrailSeal Tailgate Gasket Installation
- Shop: Access Smart Pack for Tonneau Covers - EZ-Retriever II, LED Light Strip, TrailSeal Tailgate Gasket
- Shop: TrailSeal Tailgate Gasket- A Tight Tailgate Seal
- Shop: Tailgate
- Video: Access TonnoSport Soft Roll-Up Tonneau Cover Review
- Search Results: tonneau covers
- Video: Lomax Folding Hard Tonneau Cover Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Towing Mirrors for a 2019 Nissan Frontier
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Q&A: Can the Bauer Products Mager Door Lock Be Used In a Right Hand Configuration
- Article: How to Measure for Trailer Hitch Drop
- Search Results: tonneau cover
- Search Results: brake controller
- Video: BAK Revolver X4s Hard Tonneau Cover Review
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Suspension Enhancement
- Q&A: Solution for Trailer Running Light Circuit Not Active on 2019 Nissan Frontier
- Shop: Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer brake controller
- Article: Trailer Wiring Diagrams