bing tracking image
Customer Service My Orders
Q & A Icon

Bearings for 7,000 lb Dexter Axle and is Press Needed to Install  

Question:

what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub.

0

Expert Reply:

For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer Bearing # 14125A and Outer Race # 14276. You will also need Grease Seal # GS-2125DL (2.125" inner diameter) or # GS-2250DL (2.250" inner diameter) though the only way to know this for certain is to check the part number on the seal itself or use digital caliper to measure your spindle where the seal rides.

A press isn't necessary for installation, but you will need a flathead screwdriver and a rubber mallet.

Additionally, I strongly recommend a bearing packer because they make the job easier and less time-consuming, not to mention less messy; you can use something basic such as the Bearing Packer # PTW1218 for this. For grease I recommend LubriMatic LMX Industrial Strength Grease # L11390 or LubriMatic Marine Trailer Wheel Bearing Grease in 3 oz cartridges # L54FR and a compatible grease gun like the # 30-800. This Marine grease would be best if you are putting it on a boat trailer.

I have added a link to a help article which details exactly how to replace your bearings, races and seals, as well as a link to a video which you should find helpful.

expert reply by:
0
Kyle S
click to enlarge
Ask The Experts a Question >>

Products Referenced in This Question











Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

wheelbearingpack
Replacing the Bearing, Races and Seals on a Trailer Hub
Bearing Repacking and Grease Seals Installation
Bearing Repacking and Grease Seals Installation - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>