Adapter Recommendation for Going from 7-Way on RV to 4-Way on Front of Toad Vehicle

Question

Question:

connection wire from 2019 Mini Winni 7 wire to 2018 Chevy Spark 4 pin

asked by: Don Z

0

Expert Reply:

For an adapter to go from a 7-way blade style connector to a 4-way the easiest solution is the 7-way to 5-way part # 787196 which is a 7-way to a 5-way. You'd just not use the extra pin on the 5-way.

expert reply by: Jameson C

0

Answer 1

The main difference between the Roadmaster Crossbar Style Baseplate #RM-524431-4 and the Roadmaster Direct Connect Baseplate #RM-524431-5 comes down to the ease of installation of the tow bars; typically vehicles that require some extra stability…

view full answer...

Answer 2

I'm sure we have what you need but I'm not certain exactly what trailer connector you have on your Bobtail truck. It looks like there are a number of potential options for the type of connector you might have, so what I can do is give…

view full answer...

Answer 3

If the plug on your Freightliner is a traditional vehicle side 7-way round pin connector like the one in the picture provided, and it is pinned the same then the Tow Ready 7 pole to 4-Flay adapter part #47405 would work out great. If you use this…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 12

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

view full answer...

Adapter Recommendation for Going from 7-Way on RV to 4-Way on Front of Toad Vehicle

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching