Swing-Away 2-Inch Drum Brake Actuator Coupler to Replace Discontinued Fulton A60

Question:

I have a Fulton A60 coupler with drum brakes 2inch ball with welded swing coupler. The coupler was very hard to move which started the project. I drilled out the pivot bolt which worked out perfectly. I then looked at the actuator which was none functional and would not slide to actuate the plunger on the master cylinder. I searched for a replacement unit but can not find the welded on unit. My question is if these are available. I am looking for a replacement unit that incorporates the welded on swing bracket. Ill even upgrade my drum brakes to disc if that coupler is available. I have more pics but for some reason could only upload one of them.

asked by: Jeff M

Expert Reply:

The Fulton A60 series surge couplers are now obsolete and since parts are no longer available for them I suggest you replace the unit with a new brake actuator like the Dexter # 099-175-00 (drum) or # 099-175-20 (disc).

This bolt-on coupler fits a 2-inch ball, mounts on a 3-inch wide channel tongue with bolt holes that are 3-inches on centers and is rated for 7500-lbs gross trailer weight. You can see more on this item in the linked video.

To create a foldaway tongue up to 48" long, you can use the Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue, part # FHDPB330301.

expert reply by: Adam R