Replacement A-Frame Coupler For 2000 Coleman Fairview Pop-Up Camper
Question:
Im wanting to replace the trailer coupler on my 2000 Coleman Fairview. It looks like it must be the A frame type. Do you have one that would fit?
asked by: Robert C
Expert Reply:
I recommend Demco A-frame standard coupler that takes a 2" ball part # DM14793-81 because of its eZ-Latch mechanism. The eZ-Latch mechanism makes hooking up easy and disengaging the coupler easy. It's designed with a 2-1/4" diameter jack hole for the jack to fit through. It is also a bolt on design.
If you need a more cost effective option, I recommend etrailer.com A-Frame Trailer Coupler part # CA-5210-B which has the same integrated jack hole design but without the eZ-Latch. This coupler requires welding.
Products Referenced in This Question
A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Yoke Latch
- etrailer
more information >
Product Page this Question was Asked From
Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2" Ball - Bolt On - 10K
- A-Frame Trailer Coupler
- Standard Coupler
- Bolt-On
- 10000 lbs GTW
- 2 Inch Ball Coupler
- Auto Latch
- Demco
more information >
Continue Researching
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2" Ball - Bolt On - 10K
- Q&A: Can Over Under Kit for Trailer Axle Be Used on Slipper Spring
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range C
- Video: Demco eZ-Latch A-Frame Trailer Coupler Installation - 2020 Taxa Mantis Travel Trailer
- Video: Demco A-Frame Trailer Coupler - Standard Coupler - DM14793-81 Review
- Shop: A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- Q&A: Can Holes be Drilled in Trailer Tongue to Install Buyers Products 10k Trailer Coupler
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Q&A: Could A-Frame Trailer Coupler # CA-5100-Z be Bolted On
- Q&A: How to Determine Weight Capacity of Electric Trailer Tongue Jack for Camper
- Q&A: Coupler Solution for A-Frame Trailer that Has 60 Degree Frame Angle
- Q&A: Replacing Swivel Jack with Drop Leg Jack on Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Bearing Repacking and Grease Seals Installation
- Video: Gen-Y Glyder Shock Absorbing Ball Mount Review
- Video: TruRyde Trailer Suspension TRSS175 Review
- Video: Review of Gen-Y Hitch Trailer Ball Mount - Adjustable Ball Mount - 325-GH-12005
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Search Results: hitch pin
- Search Results: gen y glider
- Search Results: gen y
- Search Results: 2" ball
- Search Results: overslung axle