Does Pittman Outdoors Rear Seat Air Mattress # 341033 Fit 2018 Toyota Tacoma 5 ft Bed

Question

Question:

Seeking a backseat air mattress that will fit my 2018 toyota tacoma. I have the 5foot bed model. In the back seat the distance between the rear of the console between the two front seats is 24-25inch The distance between the back doors is 55 You online site indicates that item #341033 will fit my truck but it lists the width of the mattress at 36 Have any ideas/thoughts?

asked by: David L

0

Expert Reply:

The Pittman Outdoors Rear Seat Air Mattress # 341033 that you referenced is listed as a fit for your 2018 Toyota Tacoma but I think the measurement you took might not be what the width of this is for. I believe the width measure you took is the floor space between the front of the rear seats and the back of the front seats whereas the width of this is the overall width that includes the portion that rests on top of the rear seats.

expert reply by: Jameson C

0

Answer 1

Yes, the AirBedz Rear Seat Air Mattress w Portable 12V Pump #341033 will fit your 2020 Toyota Tacoma. This air mattress has a maximum weight capacity of 800-lbs, measures 55" long x 35-1/2" wide x 17-3/4" tall, and includes an…

view full answer...

Answer 2

The AirBedz Rear Seat Air Mattress #341033 is going to be the only interior option that we carry. With the limited space in your Access Cab it will most likely be a bit tight to fit, but with it being an air mattress it's a bit more flexible and…

view full answer...

Answer 3

The AirBedz Rear Seat Air Mattress, #341033 is confirmed to fit the 2017 Mazda CX-3. This mattress has dimensions of 55 long x 35-1/2 wide x 17-3/4 tall, inflatable mattress products have dimensions that can change slightly depending on your chosen…

view full answer...

Answer 4

Your bikes are unusually heavy at 75 lbs but we have a rack that will work. For a bike rack that is designed for the heavier electric bikes we only have one option that can carry up to a 75 lb bike. It is the Hollywood Racks #HLY84FR. Since the rack…

view full answer...

Answer 5

We sure do. For your 2009 Jeep Wrangler X, you can use the Hollywood Racks Destination E Bike Rack for 2 Electric Bikes #HLY66ZR. This bike rack is designed to fit into 2" hitch receivers, has a weight capacity of 140-lbs or 2 70-lbs e-bikes,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Hi Steve, thanks for the question, and we do indeed have the correct mounting panel for the Redarc Tow-Pro Liberty #RED24FR on your 2007 Toyota Tacoma. What you need is the following: - Mounting Panel for Redarc Tow-Pro Trailer Brake Controller…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

view full answer...

Does Pittman Outdoors Rear Seat Air Mattress # 341033 Fit 2018 Toyota Tacoma 5 ft Bed

Product Page this Question was Asked From

Continue Researching