Are Replacement Parts Available for the etrailer 4,900-Watt Portable Inverter Generators

Question

Question:

Are parts available for the genset and who is the manufacturer?

asked by: Kevin M

0

Expert Reply:

Yes, we have tons of replacement parts for the etrailer 4,900-Watt Portable Inverter Generators 333-0001-0002, some of which are listed for you below. These etrailer branded inverter generators are made by a company called Firman which have a longstanding reputation for quality manufacturing.

Replacement Spark Plug for etrailer 2,000-Watt Portable Inverter Generator part # 333-312455001
Replacement Spark Plug for etrailer 4,500-Watt Generator and 3,200-Watt Inverter part # 333-330723557
Replacement Spark Arrestor Kit with Hardware for etrailer 3,200-Watt Portable Inverter Generator part # 333-330713520
Replacement Battery for etrailer 3,200-Watt Portable Inverter Generator part # 333-330713621
Replacement Ignition Coil for etrailer 3,200-Watt Portable Inverter Generator part # 333-330723537
Replacement Ignition Coil for etrailer 2,000-Watt Portable Inverter Generator part # 333-317723509
Replacement Carburetor Assembly w/ Stepper Motor for etrailer 3,200-Watt Portable Inverter Generator part # 333-330723572
Replacement Air Filter Element for etrailer 3,200-Watt Portable Inverter Generator part # 333-330723578

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Are Replacement Parts Available for the etrailer 4,900-Watt Portable Inverter Generators

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching