Electric Stabilizer Jacks for 2019 Bambi Sport 22FB

Question

Question:

Will these fit for my airstream Bambi 22fb?

asked by: Matt

1

Helpful Expert Reply:

The Lippert Components High-Speed Power Stabilizer Jack # LC298707 fits the very standard mounting hole dimensions that are separated by 68-11/16 inches. I'd be surprised if your 2019 Bambi Sport 22FB wasn't compatible but if somehow, it's not we have the Ultra Fab kit part # UF39-941705 which is designed to fit frame widths of 48 to 80 inches so it would definitely fit if the Lippert does not. We don't have a way to look up your frame dimensions otherwise I would check!

expert reply by: Jameson C

1

Answer 1

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 2

I looked up your Dexter axle info and you have a 3,500 lb Torflex axle which the part #K71-707-01 would be the correct lift kit for. This will give you a lift of 2-5/8 inches.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 6

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 7

Hi Sean, We do offer the Ground Control 3.0 for prepped trailers part number 2021106810 as part #LC52ED. This is going to include the rest of the components needed to complete the system. Since we don't have a video of this kit yet I've…

view full answer...

Answer 8

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Electric Stabilizer Jacks for 2019 Bambi Sport 22FB

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching