Can Wiring be Rerouted Through a Hole Drilled in the Center of Optronics LED
Question:
Can i drill out the spot in the very center and reroute the wiring out there? Is the room inside for the wire to be routed that way?
asked by: Paul
Helpful Expert Reply:
There is room inside the Optronics LED # MCL44RB to reroute the wires but not through the center divot like you're thinking. The circuit board with the diodes is right there and it's glued to the inside of the back housing. The hole you drill has to be outside of the box I've drawn on the back of the light. That box is basically where the circuit board is.
With that being said, I don't remember drilling and moving the wires at all. The housing isn't designed to be modified and therefore any warranty would be voided from drilling into it. Also, with the ring terminal on the ground wire you'll need to do additional modifications just to get the wires from where they are through another hole.
Product Page this Question was Asked From
Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Non-Submersible Lights
- LED Light
- 4L x 1-1/2W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: Gooseneck Trailer Hitch for a 1996 Ford F-450
- Article: Most Popular Wheel Bearings
- Q&A: Do The Puck Feet Of The Gen-Y Hitch Gooseneck Trailer Hitch For Puck Systems Lock Into Place
- Q&A: Power Draw of Diamond LED Trailer Tail Light w/ Reflector
- Article: How to Install E-Track in 3 Easy Steps
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: How To Replace The Brakeaway On A Dexter LP75 Actuator
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Ladder for 2017 Grand Design Solitude
- Q&A: Replacement Disc Brake Kits and Brake Parts for Ranger Boat Trailer
- Q&A: Replacement 12-1/4" X 2-1/2" Electric Brakes For a Dexter 8,000LB Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub