What Color Is The Stop Light Switch Wire On A Chevrolet Equinox
Question:
Color of hot wire when pedal depressed at kick panel?
asked by: Marieau M
Helpful Expert Reply:
I didn't see what vehicle you were using but if it is a Chevrolet Equinox then the stop light switch wire cannot be obtained at the brake pedal because it does not carry enough voltage. The stop light switch wire must be accessed inside an electrical connector located under the passenger side sill garnish molding. The wire you are looking for is white with a blue stripe. Once you find this you can then splice the red wire on the brake controller into this with a quick splice connector part # SWC502905-1.
I have attached a photo of the connector that you will splice into for the stop light switch circuit. Please note that the process to install a brake controller on the Chevrolet Equinox is unlike most others due to the difficulty of acquiring each circuit therefore professional installation is strongly advised. If you will be doing the install yourself then I recommend you look over the 18-NA-123 Technical Service Bulletin (TSB) beforehand.
The other option you have if the above is not something that you are interested in completing is to use the Curt Echo Mobile Trailer Brake Controller part # C51180 which does not require a hard line connection to the vehicle's stop light switch circuit.
Products Referenced in This Question
Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1
- Wiring
- Wire Connectors
- Quick Splice Connectors
- 18-16-14 Gauge
- Spectro
more information >
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Tuson Asymmetric Sway Control - 1 to 4 Axles
- Shop: Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1
- Shop: Replacement Mounting Bracket for Draw-Tite Activator or I-Command Brake Controller
- Shop: Replacement Mounting Bracket for Tekonsha Prodigy and P2
- Shop: Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18/10-12 Gauge - Brown - Qty 1
- Search Results: connectors
- Search Results: quick splice
- Search Results: backup lights
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Installation Location of Tuson Electronic Sway Control for Electric Trailer Brakes
- Q&A: Replacement Mounting Bracket for Valley Odyssey 52810 Brake Controller
- Shop: Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Article: Trailer Wiring Diagrams
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Video: Choosing the Right Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer jack
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement