What Bolts Are Needed To Install a Class III Hitch On a 2011 Honda Odyssey
Question:
I got a Reese 51156 hitch receiver to mount on 2011 Honda odyssey. But I dont know the bolt specs. Really appreciate if you guys can help on this. Regards
asked by: Karthik
Expert Reply:
I took a look at the install instructions for the Reese Trailer Hitch Receiver 51156 which is comparable to our Draw-Tite Max-Frame Trailer Hitch Receiver part # 75270 and they both call for six M12 x 1.25" x 35mm bolts to be used along with six 1/2" conical tooth washers. If you need to obtain these bolts and washer you can do so with the Replacement Hardware Kit for Trailer Hitches part # RHK. If you do go with this kit you will just need to enter Draw-Tite" in the manufacturer box and "75270" in the hitch item number box.
Please note if you will be towing with your Odyssey you will need a few other items like a trailer wiring harness, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118521 which is plug and play and a ball mount kit, the etrailer.com Ball Mount Kit for 2" Hitches part # 989900 which should have everything that you need.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Comparison Between Draw-Tite 76025 and EcoHitch 306-X7253 for 2015 Honda Odyssey
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Transmission Cooler
- Q&A: How To Install a 7-Way Trailer Connector On a 2016 Honda Odyssey
- Q&A: Choosing OEM or Aftermarket 5th Wheel Puck System for 2021 Ford F-250
- Q&A: Aluminum vs. Steel Cargo Carrier are there Any Disadvantages for Aluminum Construction
- Q&A: Lock For Hollywood Racks TRS Bike Rack to Lock Rack & Bikes
- Q&A: Can Tekonsha Trailer Wiring Harness for 2012 Honda Odyssey install on Vehicle with Backup Sensors