Kwikee Step Replacement Motor Recommendation for 909550 on RV

Question

Question:

What motor will replace Kwikee Part # 909550 on a 96 Ford E-350 RV?

asked by: Gino T

0

Expert Reply:

For your older style of Kwikee RV step with part number 909550 the Lippert Components Kwikee Step Motor Conversion/Upgrade Kit # LC379145 is the correct kit to use. This will upgrade what you have to the current style of motor and module as well.

expert reply by: Jameson C

0

Answer 1

For your Kwikee 32 Series RV steps, you can use the: -Replacement Motor for Kwikee Electric RV Steps #LC379147 for a replacement motor. For a replacement control module, you're going to need the: -Replacement Control Unit for Kwikee Electric RV…

view full answer...

Answer 2

You need the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps #LC379608 for your 1999 Winnebago Brave. This is the motor that has been confirmed to replace your step motor on the Kwikee Series 32 steps.

view full answer...

Answer 3

If your Kwikee steps intermittently retract and you hear a clicking noise it could either be your gear missing a tooth, or it could also be the motor; there is really no way to know for absolute certain though you will want to check and see if that…

view full answer...

Answer 4

The correct replacement motor for Kwikee 32 Series Steps is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 8

The replacement reverse lock out you are looking for is the part #TK71-755-00. This would allow you to use the same adapters and fittings you have now.

view full answer...

Answer 9

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

view full answer...

Answer 10

The thread size is 3/8"-24 but the fitting size is 3/16". This standard for trailer brake lines. This will go from 1/2 inch thread size to 3/8 inch. If the dimensions you took are 1/2 inch and 3/8 inch of the threads this will fit.

view full answer...

Answer 11

If your vehicle's plug was factory installed, I would start by checking to see if you have a blown tow package tail light fuse. I've attached an image from your owners manual highlighting the position 3 location to check the 15 AMP fuse for…

view full answer...

Answer 12

Yes. The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K #AKUBRK-35-D are compatible with the Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized #8-247-50.…

view full answer...

Kwikee Step Replacement Motor Recommendation for 909550 on RV

Product Page this Question was Asked From

Continue Researching