Strap Recommendation for Securing Canoes to Roof Rack

Question

Question:

I want an 8 to 10 foot set of straps to tie down a canoe

asked by: Gail D

0

Expert Reply:

For straps to use to strap down your canoe we have the etrailer.com Cam Buckle Cinch Straps # E98876-2 which are 13 feet long and have a safe working load limit of 293 lbs so they will work really well. These were designed with carrying canoes in mind so they will work really well and be easy to use for your application. I attached a review video for them with more info as well.

expert reply by: Jameson C

0

Answer 1

Honda doesn't offer an official roof weight capacity for the 2020 Honda Fit even in their owner's manuals. They do not offer factory roof racks since they do not believe the Fit is designed to carry weight. They do say that the total load…

view full answer...

Answer 2

The Malone SeaWing #MPG113MD is about 27-1/2" wide. When you mount these on your roof, just be sure to slide each SeaWing as close to the edge as possible so they both fit!

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 11

I took a look at your order and it was the Rhino-Rack Roof Rack for Factory Tracks - 54" Bars #Y02-480B-NT which is too short for the 63 inch spacing on your truck. For that spacing you will need the following: - Rhino-Rack Roof Rack for Factory…

view full answer...

Answer 12

I agree it can be a bit overwhelming looking through all of the roof racks for your 2024 Subaru Forester, but don't worry I'll help you out. The first thing you'd want to get figured out is the style of bars you're looking for.…

view full answer...

Strap Recommendation for Securing Canoes to Roof Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching