Bearing Kit for 3500-lb Dexter Axle on 2018 Catalina Trail Blazer TH26
Question:
I have a 2018 Catalina Trail Blazer TH26 and want to replace the wheel bearings. The unit has 3500 lb. Dexter axles with EZ Lube. Can you suggest inner, outer bearings and seals.
asked by: Cliff E
Expert Reply:
An axle's weight rating tells us a lot about the bearings it is likely to use and a 3500-lb Dexter axle typically uses inner bearing # L68149, outer bearing # L44649 and seal # 58846 which has an inner diameter of 1.719-inches and an outer diameter of 2.565-inches. By the way these components are offered together as kit # BK2-100 which also includes the races, tang washer and cotter pin. If you pull one hub and can confirm the outer bearing is # L44649 then you can confidently use bearing kit # BK2-100.
When you re-pack your new bearings you might want to use a bearing packer like # ALL647646 or # L70025 which help you get the bearings fully packed with fresh grease while reducing some of the mess. You can refer to the linked article for more on the process of replacing your tandem axle Catalina's bearings.
I also linked an article on the available formulas of grease for various applications. We offer wheel bearing grease in 14-ounce tubes # L11465 as well as in 4-lb tubs # L11380.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Powerbuilt Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- Powerbuilt
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Lithium Complex-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 16 oz
- LubriMatic
more information >
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle