Westin HDX Drop Nerf Bar Hardware Recommendation for 2018 Ram 3500 Crew Cab

Question

Question:

Dose this hardware kit work for the running boards I have for 2018 Dodge Ram 3500 crew cab, I have the Westin HDX step running boards. Picture is one of the faces of the mounting bracket/holes that mounts to the truck panel. Needing all the hardware and bolts whole kit, don’t really need the brackets cause I have them.

asked by: Josh

0

Expert Reply:

The correct Westin HDX Drop Nerf Bars for your 2018 Ram 3500 crew cab is the part # 56-135652 which means the correct hardware kit is the part # 56-135PK.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Mounting Hardware Kit for Westin HDX Nerf Bars with Drop Steps #56-135PK is sold as a kit including the brackets and is not available without the brackets.

view full answer...

Answer 2

The Westin HDX replacement hardware kit part #56-135PK is the correct hardware kit for the correct HDX Westin running boards that fit your 2011 Ram 3500 crew cab part #56-13565 but you would need to make sure that the steps you have are this part…

view full answer...

Answer 3

The Replacement Mounting Hardware Kit #56-135PK for the Westin HDX Nerf Bars with Drop Steps #56-13555 and #56-135552 is the only replacement kit that Westin offers. They do not offer a kit with just the bolts and nuts for your 2010 Dodge Ram 1500…

view full answer...

Answer 4

The Westin Hardware Kit for HDX nerf bars part #56-1372PK that you referenced comes with hardware for both sides of the vehicle.

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...