Wire Gauge of Power Wire for the Curt Trailer Wiring Harness # C56407

Question

Question:

What is the gauge of the wire that is used to run and connect to the battery?

asked by: Derek D

0

Expert Reply:

The wire that runs to the vehicle battery that comes with the Curt trailer wiring harness part # C56407 that you referenced is 12 gauge.

expert reply by: Jameson C

0

Answer 1

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

view full answer...

Answer 2

The T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56407 that fits your 2018 Jeep Wrangler MUST have a hot lead run to the battery because the port you are referencing is not rated to handle additional amperage. Using this…

view full answer...

Answer 3

LED lights draw considerably less amperage than incandescent lights. They also run much cooler. These 2 features are why LED lights last so long. The incandescent version of #STL8RB is #ST8RB and it draws 2.5 amps for the stop/turn signal functions…

view full answer...

Answer 4

According to Curt Manufacturing, their #C56407 trailer wiring harness is compatible with all models of the 2021 Jeep Wrangler Unlimited, so it'll work just fine for you. If you click the provided link, you can see an install video that you might…

view full answer...

Answer 5

If you are looking for a quick and easy plug and play wiring to get your 2021 Jeep Wrangler JL set up to be flat towed behind an RV, then the Curt #C96JR will not require a wire to the battery. This will plug in behind the tail lights and then follow…

view full answer...

Answer 6

The Roadmaster Direct-Connect Base Plate Kit part #RM-521453-5 which is a fit for a 2019 Jeep Wrangler Unlimited will work with the Roadmaster Falcon 2 Tow Bar part #RM-520. That said, you would not use the crossbar with quick-disconnects. The tow…

view full answer...

Answer 7

If you haven't already, I would start by replacing that fuse. The #C56407 uses a 10 amp fuse. I'm assuming you repaired the short in the wiring as well so I would see if it works after the fuse is replaced. If it still doesn't work, it…

view full answer...

Answer 8

The best choice for 4-way trailer wiring for your 2018 Jeep Wrangler JL is the T-One kit part #118786. Reason is it has higher amperage ratings so it would be more difficult to short out and because T-One in general just makes more reliable trailer…

view full answer...

Answer 9

Starting with the trailer hitch I highly recommend the etrailer.com Class III #e98856 for your 2020 Jeep Wrangler (congrats on the new Jeep, by the way). This Class III hitch is designed specifically for your Jeep Wrangler in more ways than one.…

view full answer...

Answer 10

I would be happy to help you set your 2022 Jeep Gladiator for flat towing. You're going to need a base plate kit, a tow bar, tow bar wiring, supplemental braking system, protective screen, charge line, stop light switch, and a high/low adapter. I…

view full answer...

Answer 11

The Curt T-Connector Vehicle Wiring Harness #C56407 you asked is compatible with the 2018 Jeep JL Wrangler Sport. It is compatible with any flat tow wiring harness so you can piggy-back with the Mopar dinghy tow wiring harness you asked about.

view full answer...

Answer 12

I have an excellent option for you to setup your 2020 Jeep Wrangler Unlimited for both trailer towing and dinghy towing. The Curt T-Connector Vehicle Wiring Harness part #C56407 will transmit the trailer lights and the Curt Custom Tail Light Wiring…

view full answer...

Wire Gauge of Power Wire for the Curt Trailer Wiring Harness # C56407

Continue Researching