Can Oil Bath Hub be Converted to Grease Hub
Question:
You say an oil bath hub is easily converted to a grease hub just by installing the correct size bearing buddy. I just spoke with the marine mechanic Ive gone to for thirty years and he says he never heard of that because the hubs are not at all the same. Now Im mixed up. But he isnt a trailer expert either. I have a 2005 EZ load single axle aluminum trailer and it still has one of the original oil bath bearings with plastic cover. Its now busted. The other was replaced with an aluminum cover five years ago. Also if I do try to just replace the covers with bearing buddies, do I need to still remove everything and clean it all our, then replace them with bearings, etc or just switch the covers out? IN A Dillema
asked by: Eric
Expert Reply:
From a hub point of view the only difference between one designed for oil bath or grease is the dust cap. The oil bath hubs have a threaded cap and the grease a press in cap. As long as you end up with the correct threaded Bearing Buddy size on your hub you'd be totally fine to replace the oil with grease.
You'd just need to tell me the diameter of your trailer hub bore where the cap installs and I'll be able to get you the correct BB if available. For example, if you have a diameter that measures 2.080 inches you'd want the Bearing Buddy # BB2080T-SS. The oil doesn't have to be totally removed but you would want to let it all drain out as much as possible.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.080 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Search Results: sleeve
- Search Results: submersible led backup light
- Search Results: spindle wear sleeves
- Q&A: Recommended Replacement Hubs for EZ Loader Trailer With Disc Brakes
- Shop: GloLight LED Trailer Utility Tail Light - Tail, Backup - Submersible - 22 Diodes - Oval - Clear Lens
- Shop: Trailer Wiring Junction Box
- Shop: Optronics LED Trailer Utility Light - Submersible - 10 Diodes - Oval - Clear Lens
- Shop: Optronics LED Trailer Utility Light - Submersible - 10 Diodes - Oval - Clear Lens
- Shop: 7-Way Molded Trailer Wire Connector - 3' Long
- Q&A: Changing from Oil Baths to Bearing Buddies on an EZ Loader Boat Trailer
- Q&A: How To Convert from Oil Baths to Grease with 2-1/6 Inch Hub Bore
- Q&A: Does Bearing Buddy Threaded Bearing Protectors # BB2080T-SS Fit Reliable Oil Bath Hubs
- Q&A: Can Trailer Hub Be Changed from Bolts to Standard Wheel Studs
- Q&A: Bearing Buddy Grease Caps for Hub Bore Dimension of 2.05-Inches
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Search Results: e z loader oil bath hubs
- Search Results: e z lube spindle
- Search Results: 168255tc
- Search Results: 168255tb
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing