JT Strong Arm Stabilizer Kit & Adapter for Rockwood Travel Trailer with Lippert Electric Stabilizer

Question

Question:

JT strong arm system. I own a 2018 Rockwood travel trailer with Lippert power jack stabilizers . I am interested in purchasing the JT strong arm system for my travel trailer I need to know exactly which parts I need for my travel trailer.

asked by: Larry

1

Helpful Expert Reply:

For your 2018 Rockwood travel trailer with a Lippert electric stabilizer, all you need in order to use the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 is the Electric Stabilizer Jack Pad Adapter # LC314597.

I have added a photo a customer sent in so you can see how this adapter would work when using the stabilizer kit on your travel trailer. The adapter kit simply attaches the feet of your stabilizer to the Strong Arm kit and you'll have the added stability you are looking for.

I've added a link to a video review of the Strong Arm Kit for you to check out as well.

expert reply by: Kyle S

1

click to enlarge

Answer 1

Unless you are near or at maximum capacity for your truck tongue weight, it would make sense to use the lighter of the two, #SSR-127-47 instead of #SSR-127-54. This will provide you a smoother ride overall but especially when you're vehicle…

view full answer...

Answer 2

Yes, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 will work great in adding more stabilization to your 2022 Rockwood 2881S so that when your washer is running your trailer isn't jumping around. This kit includes 6…

view full answer...

Answer 3

I know that the auto-leveling systems on 5th wheel trailers can be a little sensitive. While there isn't anything prohibiting the use of a JT's Strong Arm system such as #LC191024 if the jacks can't fully retract if may throw error codes…

view full answer...

Answer 4

The correct JT's Strong Arm Jack Stabilizer Kit for a 2020 KZ Durango Gold 386FLF will be dependent on the distance between the front two landing gear legs (inside to inside). If this distance is 58" or more then you need part #LC191023 but…

view full answer...

Answer 5

Tri Pods do give you a major boost in stabilization, but a system like the JT Strong Arm Stabilizer Kit #LC191025 will be much more stabilizing. Why? Well you are taking your current jack and adding two separate components, creating a larger spread…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

JT Strong Arm Stabilizer Kit & Adapter for Rockwood Travel Trailer with Lippert Electric Stabilizer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching