Bike Rack Recommendation for Heavier Bikes with Fenders that Has Ramps and Can Fit Class I Hitch

Question

Question:

Hi, I have a 52lbs bike With fenders, I want a ramp style bike rack, hopefully that I can add a rack to push the bike up on carrier. 1.25 hitch Class 1

asked by: Julie

0

Expert Reply:

I have a perfect solution for you! Check out the Thule EasyFold XT part # TH903202. This bike rack has ramps built into the rack to help with loading/unloading, has a higher weight capacity that would easily carry a 52 lb bike, is compatible with bikes with fenders since it secures the bikes by grabbing them by the frame, and is compatible with Class I 1-1/4 inch hitches. I attached a picture that shows this rack carrying bikes with fenders as well.

For more info on this rack check out the review video I attached as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I recommend checking out the Hollywood Racks Destination E Bike Rack for 2 Electric Bikes #HLY66ZR. This fits a 2" hitch receiver, can hold up to 70 lb bikes, and includes a storable ramp for easy loading and unloading of your heavy bike(s). The…

view full answer...

Answer 2

First, the pros and cons of each type of rack: hanging versus platform. Pros for Hanging: Lighter weight Easier to store Easier to install/remove Less extension from back of vehicle Cons for Hanging: Not compatible with all bike styles unless using…

view full answer...

Answer 3

I see you ordered a class 1 1-1/4" trailer hitch receiver for your 2015 Toyota Prius so you will want to make sure you buy a bike rack that is also compatible with that receiver. The Inno Tire Hold 1 Bike Platform Rack - 1-1/4" and 2"…

view full answer...

Answer 4

Good news! My friend AJ's video is finally up and you can see him review the Yakima OnRamp #Y36FR in the video I attached below. I love your description of a road narwhal. If you're worried about the extra length behind your vehicle with a…

view full answer...

Answer 5

There is not a ramp that will work with the Kuat Sherpa Bike Rack. If you like the Sherpa then you would probably like the upgraded Kuat NV 2.0 which not only is compatible with the Access Ramp #ANVBRB, but also has a higher weight capacity of 60lbs…

view full answer...

Answer 6

I do have a recommendation for you but the Kuat NV 2.0, part #NV22G, isn't going to work with your fenders. Wheel mount bike racks rarely work with bikes that have fenders. Instead take a look at the Saris Freedom, part #SA4412B. It has the same…

view full answer...

Answer 7

The Thule EasyFold XT 2 Electric Bike Platform Rack #TH903202 that you referenced is the perfect solution. It is a platform rack that only grabs the bikes by the frame so your fenders will not interfere and the frame mounts were designed to attach to…

view full answer...

Answer 8

First, highway driving should actually be less stressful on the rack than surface road driving because there tends to be less curves, bumps, pot holes, and other similar things you would find on the streets. Any of the racks you are interested in…

view full answer...

Answer 9

With frame mounted bike racks like the Saris Freedom #SA4412B you can usually find a spot to mount your bike down, but it's not the simplest bike rack to get your bikes loaded up. I would recommend getting the Kuat NV 2.0 #BA22B. It is worth the…

view full answer...

Answer 10

The best bike rack for your 2018 Subaru Outback will depend on what the distance is from the center of the hitch pin hole to the edge of your rear bumper. I highly recommend the Saris Freedom #SA4412B because at less than 30 lbs it is extremely…

view full answer...

Answer 11

There are a pair of options I recommend for electric bikes with step-thru frames, fenders and fat tires. There are pros and cons to each so first I'll mention the racks (and accessories that are needed) and then I'll go over the differences.…

view full answer...

Answer 12

Since your Giant hybrid Momentum LaFree E+ model has fenders the best single bike rack carrier we have is the Inno Tire Hold part #INH110 which wouldn't interfere with the fender and has the needed weight capacity as it is rated for up to 60 lbs.…

view full answer...