BAKFlip MX4 to Fit 2019 Toyota Tundra with 6-1/2 Foot Bed

Question

Question:

Does the backflip mx4 fit a 2019 toyota tundra 6.5ft box.

asked by: Eamonn S

0

Expert Reply:

It sure does. The correct BAKFlip MX4 that fits your 2019 Toyota Tundra with a 6-1/2 foot bed is part # BAK48410 if you don't have the Deck Rail System. If you do use part # BAK48410T instead.

I've linked a video of the MX4 showing its features. It's a different truck and part number than what you need but the features are the same.

expert reply by: Charles S

0

Answer 1

While we have height-adjustable ladder racks, none of them are compatible with your BAKFlip Tonneau Cover like the BAKFlip MX4 #BAK48410. There is a version of the Yakima OverHaul HD ladder rack works on tonneau covers #Y01151-5855, but the tonneau…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 6

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 7

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...