Do All Four Exhaust Hangers Need Removed To Install the Curt Hitch C13315 on a 2019 Mazda CX-5
Question:
I lowered the muffler as far as I could and the hitch would not fit past the lower part of the rear bumper no matter what I did. The sides of the bumper curve back inwards and the part would not fit in. Was I doing it wrong or does it not fit the late model 2019 Mazda CX-5 Grand Touring Reserve?
asked by: Noah
Expert Reply:
The Curt Trailer Hitch Receiver part # C13315 is a confirmed fit for your 2019 Mazda CX-5 Grand Touring Reserve. I confirmed this with my contact at Curt. In regards to installation, how many of the exhaust hangers did you remove? If you just removed the rear two exhaust hangers then that might be why you cannot maneuver the trailer hitch up into place as you will need to remove all four hangers in order to drop the muffler low enough to slide the trailer hitch into place. Also, there is a plastic trim piece under the rear bumper that is only present on the Grand Touring model that you will need to remove.
I have attached a video for you that actually shows the entire process. Please let me know if you still have trouble after confirming you have removed all four exhaust hangers.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Which Hitches are Made in the USA
- Q&A: Recommended 2-Inch Trailer Hitch For 2024 Mazda CX-5
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: Mazda CX-5 Signature Hitch Installation and Trim Removal
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 2024 Mazda CX-5 Trailer Hitch and Wiring Recommendations with Mounting Brackets
- Q&A: Is Trimming Required to Install the etrailer Hitch # e98902 on My 2021 Mazda CX-5?
- Article: My Trailer Hitch Doesn't Fit
- Article: Roof Rack Information
- Article: How to Measure for Trailer Hitch Drop