Parts Needed for Towing Trailer With 2005 Chevy Malibu Maxx
Question:
2005 Chevy Malibu Max LS. I would like to tow a small trailer will the 2 inch hitch ball # C40018 be strong enough, I noticed that theres one up to 3500 lbs. Im going by the list from the Receiver Hitch # C12280.
asked by: Tina H
Helpful Expert Reply:
You can tow a small trailer with your 2005 Chevy Malibu Maxx, and you can definitely use the 2" Hitch Ball # C40018 which has a 3,500 lb weight capacity. That said, you need to get the correct size hitch ball that fits your trailer's coupler and small trailers often use a 1-7/8" hitch ball and for that you will need the 1-7/8" Hitch Ball # C40001 which has a 2,000 lb capacity.
Either amount is actually going to be more than enough for you to tow with your Malibu because I took a look at the online owner's manual for a 2005 Chevy Malibu Maxx and it says your maximum towing capacity is 1,000 lbs and you are limited to the lowest-rated component.
I assume your small trailer is within that limit and we can set you up with all the other parts you'll need as well.
The Curt Trailer Hitch Receiver # C12280 you referenced will work for your vehicle and you will also need Drawbar # C45520, Pin and Clip # F-4 along with one of the aforementioned hitch balls.
The other thing you will need is a wiring harness to power your trailer's lights, Wiring Harness # C56013. It is also strongly recommended you use Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector, which will increase its durability and extend its lifespan.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Installation of Curt Class II # C12280 Hitch on 2005 Chevy Malibu Maxx
- Q&A: Stromberg Carlson Bike Bunk Used With Pop-Up Camper
- Article: Trailer Hitch Installation Tips