Where Is the Brake Controller Plug on a 2011 Ford Flex

Question

Question:

I have a 2011 Ford Flex with the factory tow package and I need to install a brake controller. Where is the plug located to attach it? Thanks for the help!

asked by: Jason

0

Expert Reply:

According to my research, the brake controller port on your 2011 Ford Flex should be located under the dash directly below the steering column as shown in the attached photo. Please note there is a dummy plug on the end of the port that you will need to remove in order to install the brake controller harness. If you still don't find it here please give your dealer a call to confirm its location.

If you do not already have a brake controller I have two really good options for you. The first option is the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR. The Tow-Pro Elite is very similar in design to a factory trailer brake controller. There is a control box that gets installed under the dash, out of sight and then a control knob that gets mounted on your dash wherever you prefer. This will provide a very clean look and will allow you to mount it in many different locations whereas other standard will need to be in a certain position/angle. The other nice feature of this brake controller is that you can switch between proportional and a user-controlled mode which I am not aware of any other brake controller that can.

The second option is the Curt Echo Mobile Trailer Brake Controller part # C51180 which will not require you to look for the plug under your dash. The reason for this is because it does not require any modifications to the tow vehicle, it just plugs into the 7-way and you use your phone to customize settings and activate the manual override. The other major reason as to the growing popularity of this brake controller is because it uses a device you are already comfortable using (your phone), you do not need to read an entire comprehensive manual and familiarize yourself with the controls and codes to use it. Please note that if your phone loses power the brake controller will still function as normal.

expert reply by: Conner L

0

click to enlarge

Answer 1

Adding skid wheels to your open car trailer is indeed what I recommend to help prevent the trailer from dragging when going up a steep driveway. These are designed specifically for this very purpose and will work well. I recommend taking a look at…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Where Is the Brake Controller Plug on a 2011 Ford Flex

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching