Will the Trailer Hitches for a 2002 Nissan Pathfinder Fit Around the Spare Tire
Question:
Ive looked at all the hitches you have listed for the 2002 nissan pathfinder. Others have more bend that clearly fits the spare tire. I just want to make sure this one will fit around a spare that is carried under the SUV.
asked by: Don
Expert Reply:
There are no known fit issues with the Draw-Tite hitch # 36222 and the factory spare tire on the 2002 Nissan Pathfinder. If you have a larger than factory sized spare, there could be fit problems. I have included a link to the installation instructions for the hitch for you.
This is a Class II trailer hitch, the only one available for the vehicle, which may be why it looks different. Class II trailer hitches have a lower capacity than Class III hitches, so you will be limited in what you can two and what accessories you can use.
I do recommend a Class III hitch and an economical one is # 13088. The Class III trailer hitch will have a 2 inch receiver opening that allows for more accessories. It also has a higher capacity and can be used with weight distribution. I have included a link to the installation instructions for this hitch as well.
If you go with the Class II hitch and plan on doing some towing, the correct ball mount is # 36071 and you can use ball # 19256 for a 1-7/8 inch or # 19258 for a 2 inch. For a hitch pin and clip use # PC2.
For the Class III hitch, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
For either hitch, the correct trailer wiring is # 118361. I have included a link to a video showing a typical installation for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >