Bolt Pattern for Lippert Kwikee 25 Series Triple Electric Step # LC3658373

Question

Question:

What are the measurements for the bolt pattern of these steps?

asked by: Jerry S

0

Expert Reply:

The mounting bracket for the Lippert Kwikee 25 Series Triple Electric Step # LC3658373 features bolt holes that are spaced apart 22 inches side to side and 8 inches front to back, on center. The bracket itself measures 25-1/2 inches wide, 9-5/8 inches tall, and 11-3/8 inches deep.

I have attached a couple short video demonstrations on this assembly that you can check out as well.

expert reply by: Chris R

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 4

I reached out to the manufacturer, Lippert, about the problems you were having and they told me the issue is your control module on the Kwikee 25 Series #LC3658373 being the wrong one. They said (rather bluntly): "You cannot use a Kwikee…

view full answer...

Answer 5

Sorry Deborah, I am a little confused with your question. The switch included with the Kwikee Electric RV Step Complete Assembly #LC3658373 when switched on should allow the steps to extend the first time the door is opened and keep them extended out…

view full answer...

Answer 6

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...

Answer 7

If you didn't have to install the pigtail that came with the Lippert Components Kwikee 25 Series Triple Electric Step #LC3658373 then you would want to test the wire functions of the current pigtail (with the 4 prong connector) that is installed…

view full answer...

Answer 8

Yes, the correct replacement part for steps, motor, and control for Kwikee RV Electric Steps, 25 Series at 24" Wide is, #LC369552 for an 8" deep step that has a drop/rise of 7". You can also select the #LC3658373 for the same the…

view full answer...

Answer 9

I checked with Lippert and the correct replacement steps for the part number 902508000 you gave me are the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps item #LC369552. We also have the Kwikee Electric RV Step Complete Assembly…

view full answer...

Answer 10

The manufacturer no longer makes Coach Steps so you were correct in picking the Kwikee Electric RV Step product #LC3658373 because Kwikee is the correct replacement brand. The manufacturer stated that this product should directly bolt on just like…

view full answer...

Bolt Pattern for Lippert Kwikee 25 Series Triple Electric Step # LC3658373

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching