Can 1,700 Pound Trunnion Spring Bars Replace 800 Pound Spring Bars for Trailer Weight Distribution
Question:
We have a reese 800# weight distribution hitch. Our current needs require an upgrade to 1700#. Can the 1700# trunnion replacement bars part #66010 work with the 800# head that we already have?
asked by: Sonia
Expert Reply:
I spoke with my contact at Reese and he stated that if your 800 pound system is newer, within the last 3-1/2 to 4 years, then the higher capacity 1,700 pound bars, like # 66010, will fit. However, what you need to also look at is the shank. The shank that came with the 800 pound system is good for a maximum of 1,500 pounds, like # RP54970.
The shank used for the complete Reese 1,700 pound system is # RP54977, and it only fits in a 2-1/2 inch receiver. If you can use the 1,500 pound shank and still remain under the gross trailer weight and tongue weight then that is a way to go.
If you must have a 1,700 pound system you will have to add a Titan trailer hitch with a 2-1/2 inch receiver. Depending on the year, make, and model of the vehicle, there may or may not be a Titan hitch available. I have included a link to our FAQ article on weight distribution for you.
Products Referenced in This Question
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Reese Replacement Trunnion Spring Bar, 1,700 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1700 lbs TW
- Trunnion Bar
- Reese
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: infiniterule trailer hitch lock
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 1,500 lbs TW
- Shop: InfiniteRule Hitch Lock for 2-1/2" Hitches - 3-1/8" Span - Stainless Steel
- Search Results: hitch lock
- Q&A: What is the Difference Between the Draw-Tite and Reese Versions of Dual Cam Sway Control
- Shop: Andersen Trailer Hitch Lock and Adjustment Pin Lock Set - EZ Hitch and EZ HD Ball Mounts - Stainless
- Shop: Trailer Hitch
- Video: Reese Weight Distribution RP58167 Review
- Article: Nickel vs Stainless Steel
- Search Results: reese replacement parts
- Search Results: hitch bar
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Shop: Reese Weight Distribution System w/ Shank - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: Replacement Head for Reese Weight Distribution System - Trunnion Bar
- Q&A: Tongue Weight Capacity of Reese Replacement Head for Trunnion Weight Distribution Systems RP58167
- Q&A: Are 1,700 lb Spring Bars Right for Camper Trailer With 1,400 lb Dry Tongue Weight
- Q&A: Replacement Head for Reese Trunnion Bar Weight Distribution System
- Q&A: Replacement Head And Trunnion With Pin For 1200 lb Reese Weight Distribution System
- Q&A: Drawing of Draw-Tite and Reese Replacement Weight Distribution Trunnion Style Head, part # RP58167
- Q&A: What Size bar Will Fit in Reese Replacement Weight Distribution Bar Trunnion # 58097
- Video: Curt Hitch Ball - Trailer Hitch Ball - C40008 Review
- Video: Curt Chrome 2-5/16 Inch Hitch Ball Review
- Search Results: 2 516 ball
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Trailer Wiring Diagrams
on Accessories and Parts
