Replacement Bearings or Replacement Hubs for 3,500 lbs E-Z Lube Axles
Question:
down to earth 3500# dual axles - bearing parts or replace hubs? hi - i have a down-to-earth dual axle ez lube equipment trailer that is going to need the hub bearings changed out. the trailer doesnt really have a model number to be more specific. nonetheless, without breaking down the hub first, would you happen to know the part numbers to order? ALSO, id like to know if the load capacity is 2800/wheel, does that mean if it bares half the weight of a 2800# load/axle?
asked by: Lou W
Helpful Expert Reply:
If you have 3,500 lb axles, then it is rare that you will have bearings that are anything other than the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100, but I do recommend pulling your hub and checking the bearing numbers printed on the face of each bearing to confirm as I'm not familiar with that manufacturer. If you wanted new hubs, then the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-EZ-K would be a great choice.
Load capacity on your trailer is rated by the weakest component in your system. This could be the tire, wheel, axle, leaf spring, coupler, etc. Most of the time the wheels are rated higher than the axle. So to use your example, if you have 3,500 lb axles that have wheels rated for 2,800 lbs each, you won't have a capacity of 5,600 lbs but rather a capacity of 3,500 lbs as limited by your axle capacity. Because you have tandem axles, the capacity is 7,000 lbs, not 11,200 lbs.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Top Gifts for Dads in 2024
- Q&A: How To Replace the Locking Cable On a Yakima HoldUp Bike Rack After Face Has Been Damaged
- Q&A: Lippert Crank Handle for Lippert Spare Tire Winch Assembly
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies
- Q&A: Does Lippert Spare Tire Winch Lock or Hold in Any Position?
- Q&A: How is Lippert Spare Tire Winch LC159056 Raised and Lowered
- Q&A: Weight Capacity Of Lippert Spare Tire Winch For Over sized Tire
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Charge a Dump Trailer Battery
- Article: Best RV Roof Vents
- Article: What is Boondocking