Recommended Grease for Trailer Suspension Wet Bolts

Question

Question:

In some videos I have seen red grease, what type of grease is best for this application?

asked by: Al

0

Expert Reply:

Red grease like the LMX Red part # L11390 is the toughest grease for trailer suspension and hub applications so it's the kind that we recommend the highest. It is ideal under temperature and pressure extremes, shock loads and high wear situations

expert reply by: Jameson C

0

Answer 1

It is still a good idea to periodically change out the bearings and seals in a hub even if you have an EZ Lube axle. Races can be tricky to remove as well but if other parts are worn it would be a good idea to replace them if you are replacing…

view full answer...

Answer 2

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Bryan, thanks for reaching out! Your Reese Elite Series Hitch (discontinued part 30143) has a height range of 14-1/2" - 17" and is only able to secure to the OEM puck system on your 2021 Ford F-450 Super Duty, so we either need to get…

view full answer...

Answer 5

I recommend the LubriMatic LMX Industrial Strength Grease #L11390 for your Dexter axle on your 2021 Vista Cruiser Travel Trailer. This grease is specifically formulated to work in extreme hot and cold temperatures under high pressures. It is also…

view full answer...

Answer 6

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 7

We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage…

view full answer...

Answer 8

Hi Wendell, We do offer compatible replacement hub/rotors for your Dexter 008-435-05 but they unfortunately do not come pre-greased. I recommend picking up the #K08-435-05 as well as bearings #L68149 and #L44649, and grease seal #RG06-050 to pre-pack…

view full answer...

Answer 9

I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 on the Wet Bolts #LC52SV for the Road Armor Shock Absorbing Equalizer Kit #LC696740. This grease is formulated for superior performance in cold and hot climates. It is also…

view full answer...

Answer 10

Hey Scott, so the braking and hub components of a Dexter 3,500 lb axle made in 1999 would be the same as what's currently used so those components would transfer over. So a bare axle like the part #T3584F-EZ-8974 would work for you but you'd…

view full answer...

Answer 11

Hey Eugene, the LMX RED grease like part #L11390 is the best option. It's the most heavy duty, waterproof, and is compatible with basically all greases. I would be cautious not to over fill the hub though as it's pretty easy to blow out seals…

view full answer...

Recommended Grease for Trailer Suspension Wet Bolts

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching