Replacement Key for Sportrack Bike Rack with E012 Lock

Question

Question:

Hello and thanks in advance. I have a sportsrack wih no id other then a sticker that says ref.6, another sticker that says says S246080. The lock drum has E012 written on it. Can you please reccommend a key? Its also missing one metal hookfoot and a rubber pad under one of rectangular pieces on which it rests. Cordially,

asked by: Nikita

0

Expert Reply:

The correct key for your Sportrack bike rack is the Replacement Key for Thule and Sportrack Racks and Carriers part # THKEYN012. If you can send me a photo of the bike rack I can see if we have the other missing pieces you need.

expert reply by: Conner L

0

Answer 1

We do offer both replacement keys and locks for Thule/SportRack products that have locks. Since they are sister companies the same locks and keys work for products from both brands. The code number on the lock is what you will use to select the…

view full answer...

Answer 2

You sure can. We'll just need to know number stamped into the metal next to the key slot. For instance, if the key number is N030, you'd need replacement key THN030. So the replacement key number for your lock would be "THKEYNXXX"…

view full answer...

Answer 3

Yes, the replacement key part #THKEYN012 would work as a replacement key for your Karrite SportPak that has key number 012.

view full answer...

Answer 4

The correct replacement key for your SportRack roof rack with a lock that has K012 is part #THKEYN012.

view full answer...

Answer 5

Yes. Based on your information, the part you need is the Replacement Key, Item #THKEYN012.

view full answer...

Answer 6

The entire lock mechanism in the SportRack Vista XL Cargo Box #SR7018 is not replaceable, but the internal lock cylinder itself can be replaced. A replacement lock and key set can be ordered using the number that appears on the lock face. Please…

view full answer...

Answer 7

The replacement key you'd need is the part #THKEYN006 since the lock core number is 006.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Replacement Key for Sportrack Bike Rack with E012 Lock

Product Page this Question was Asked From

Continue Researching